Saturday, August 11, 2012

Different Between Hub And Switch

Hub

It is a layer 1 device, it is a dummy device, it always uses broadcast for communication , in hub bandwidth is always shared mode, and data transmission in bits format.

Switch

It is a layer 2 devices ,it is an intelligent device  it is hardware based, generally used for connecting single topology (Segment), it always works with flooding and Unicast  in switch data transmission in frame format.


Hub Switch
1. Hub is a layer 1 device 1. Switch is a layer 2 and 3 device
2. It is not an intelligent device, it is an dummy device 2. It is an Intelligent device
3. It work with bits 3. It work with frame
4. Used broadcast for communication 4. Used Flooding and unicast for communication
5. Bandwidth is shared 5. Each port of the switch fixed bandwidth
6. It supports Half-duplex communication 6. Its supports Full duplex communication
7. In hub 1 broadcast and 1 collision use 7. In switch 1 broadcast and multiple collision use , depend on port 

Saturday, August 4, 2012

Different Between Bridge And Switch

Bridge
It is a layer 2 device, it is a software based, generally used for connecting two different topology (Segment), in bridges data transmission in frame format.

Switch
It is a layer 2 devices ,it is an intelligent device  it is hardware based, generally used for connecting single topology (Segment), it always works with flooding and Unicast  in switch data transmission in frame format.

Bridge Switch
1. Bridges are software based 1. Switches are hardware based
2. Bridges have less number of ports 2. Switches have more number of port
3. Bridges are layer 2 devices 3. Switches are layer 2 and 3 devices
4. Bridges Generally used for connecting two different topology (Segment) 4. Switches Generally used for connecting single topology (Segment)
5. In bridges data transmission in frame format 5. In switches data transmission in frame format
 

Booting Sequence of ROUTER

POST --> ROM --> Flash  --> NVRAM --> RAM



1. POST       (power on self test Checks the hardware)

2. ROM       (The rom loads the bootstrap programs and searches for the IOS)

3. FLASH   (IOS from Flash is loaded)

4. NVRAM ( The startup configuration is loaded form the NVRAM)

5. RAM       (Boot process is completed as everything is loaded into the RAM)